Insights 13 November 2026 Lumrgi Solutions
Burner fuel vs diesel: is switching worth it?
A cheaper fuel quote is only the start. Compare useful heat, extra running costs, payback and supply risk before deciding whether to switch from diesel.

Editorial illustration created for this guide; not a photograph of a Lumrgi site or evidence of fuel performance.
A lower fuel quote gets your attention. Before you approve a change, you need to know what it will leave in the business after extra running costs, equipment changes and the disruption of switching.
You may be able to cut your fuel bill using the burner you already own. In many cases, a fuel can be tailored to suit that burner at a much lower price than diesel.
Compare burner fuel and diesel by the cost of producing the same useful heat. Include ongoing costs and the money needed to change over. Then check whether the saving is large enough, dependable enough and quick enough to justify the change.
That applies whether you sign off a large operating budget or order every load yourself. Here is how to put a fuel offer through that test.
Compare the cost of doing the same work
Useful heat is the heat that actually does the job after losses. For your business, that may mean making steam, heating a process or drying a product to the required standard.
A litre price tells you what goes into the tank. It does not tell you how much finished work that litre will produce.
For an oil-fired boiler, you can compare fuel cost per tonne of steam at the same steam and feedwater conditions. For a mineral dryer, compare cost per tonne of acceptable dried product at similar starting moisture and the same final dryness. Keep production rate comparable too.
If you use a heat calculation, three figures connect litres to useful heat:
- Density: how much each litre weighs, at a stated temperature.
- Net calorific value: energy per kilogram, excluding the heat recoverable by condensing the water vapour formed during burning.
- Useful efficiency: the share of that energy reaching the output you are measuring.
Use the same measurement boundary for both fuels. Do not compare heat at one boiler's outlet with heat delivered after another system's pipe losses. The US Department of Energy's steam-cost guide explains why fuel, equipment performance and operating conditions belong in the same comparison.
A worked fuel-cost comparison
This illustration uses diesel at R33.00/L. The alternative-fuel price, fuel properties, efficiencies and other costs are assumptions, not a quote or measured IGNIFLOW results. Assume both fuels have already passed the equipment and site checks.
Both prices are treated as being on the same VAT and delivery basis. Check this against your own quotes before using the result. Volumes and density use a consistent temperature basis. Both efficiency assumptions use the net energy basis and measure the same useful output.
| Input or result | Diesel example | Alternative burner fuel example |
|---|---|---|
| Price used in the comparison | R33.00/L | R13.00/L |
| Density at 20°C | 0.84 kg/L | 0.88 kg/L |
| Net calorific value | 42.6 MJ/kg | 40.0 MJ/kg |
| Assumed useful efficiency | 85% | 80% |
| Useful heat per litre | 30.42 MJ | 28.16 MJ |
| Fuel cost per useful gigajoule | R1 085 | R462 |
A gigajoule, or GJ, is simply a unit of heat equal to 1 000 megajoules. In this example, the alternative delivers less useful heat per litre but costs less per unit of heat because its price is lower.
To check the calculation:
Useful heat per litre = density × net calorific value × useful efficiency. Enter 85% as 0.85.
Fuel cost per useful GJ = 1 000 × price per litre ÷ useful heat per litre.
Ask for gross or net calorific values to be identified clearly. Do not put a gross value into this net-based calculation or assume the same efficiency for both fuels. If the required figures are missing, ask for them before treating the result as a saving.
Discuss a fuel-cost comparison with Lumrgi. Start with your current fuel, approximate monthly use and site location. A recent delivered price helps; you can enquire before you have the technical figures.
Ask about a tailored fuel for your existing burner
In many cases, you can keep your existing burner and use a fuel tailored to suit it at a much lower price than diesel. IGNIFLOW Bespoke is Lumrgi's tailored fuel option, with the potential for significant savings while meeting agreed viscosity and preheating requirements.
The discussion starts with your existing burner, how easily the fuel needs to flow through the system and what heating your equipment can provide. Those requirements help define the fuel to assess and the operating costs to compare.
Share your burner details and existing heating arrangement if you have them. The proposed specification, equipment fit and actual saving need to be confirmed for your installation. A tailored fuel does not automatically remove the need for preheating or equipment changes.
Work out what remains each month
Now give that example a monthly workload: 100 GJ of useful heat, produced under the same conditions.
| Monthly comparison in the same illustrative example | Amount |
|---|---|
| Diesel fuel cost | R108 494 |
| Alternative fuel cost | R46 165 |
| Fuel-cost difference | R62 329 |
| Assumed extra running costs with the alternative | R8 000 |
| Illustrative monthly operating saving | R54 329 |
The R8 000 is a placeholder for additional costs such as fuel heating, cleaning, servicing and handling. Replace it with the actual difference between the two options. Calculations use unrounded values; displayed results are rounded.
That leaves about R54 300 a month in this illustration, after those added running costs. It is still before the one-off changeover cost and any financing or tax effects. The actual saving depends on your confirmed prices and operating figures.
When checking your own numbers, include:
- Energy beyond the fuel: electricity or steam needed to heat, pump or spray it, where this is not already counted.
- Maintenance and labour: filter changes, cleaning, servicing and extra handling.
- Production effects: slower starts, reduced output, rejected product or avoidable stoppages, if these occur.
- Delivery terms: transport, minimum loads and any extra delivery charges that were left out of the quote.
Count each cost once. If delivery is already in the litre price, do not add it again. Compare maintenance costs for both options rather than assuming one has none.
How long will the change take to pay for itself?
Suppose the business in this example needs R75 000 for the required equipment changes, installation, testing and planned changeover. At R54 329 a month, the illustrative simple payback is about 1.4 months.
Simple payback = one-off changeover cost ÷ monthly operating saving.
That only works when the saving is positive. It assumes the same monthly output and costs continue; it is not a full investment return calculation.
Check the cash needed as well. A larger minimum delivery or shorter payment terms can tie up more cash even when fuel costs fall. List that stock and payment requirement separately from equipment spending so you can see both the saving and the cash needed to make the change.
For equipment used only occasionally, or a business with uncertain production volumes, a long payback may make staying with diesel the more sensible choice. Use the hours and output you realistically expect.
A 12-month contract can lower your burner cost
With a 12-month fuel supply contract, Lumrgi also offers subsidised burners at well below market prices.
That can reduce the upfront cost of changing fuel. Ask Lumrgi about a burner suited to your application and a quote that shows the burner price and any installation or commissioning costs separately. Use the actual changeover cost in your payback calculation in place of the R75 000 example above.
Compare the total cost over the 12 months as well as the upfront saving. Confirm the fuel-price terms, any volume commitments, what is included and when payments are due before signing.
Ask about fuel supply and a subsidised burner when you enquire.
Test the saving when the assumptions get worse
A decision that works only at today's quoted price needs a closer look.
In the example above, increase the alternative fuel price by 15%, from R13.00 to R14.95/L. Keep diesel's price, useful output, efficiency and other running costs unchanged. The illustrative monthly operating saving falls to about R47 405, and simple payback stretches to about 1.6 months.
That is a sensitivity check, not a price forecast. It shows why the gap between two litre prices is not enough to approve a change.
Ask what happens if your actual fuel use is higher than expected, monthly production drops or a delivery is delayed. Agree how long prices are valid, how price changes will be handled and what supply arrangements are available. Treat untested assumptions as questions to resolve, rather than giving them the most favourable value.
Set the conditions for a switch
A cost advantage is useful only if the fuel suits the operation. Before a trial, have your burner supplier or a qualified technician confirm compatibility, heating and handling needs, and the changeover method. Manufacturer documentation shows that burner arrangements can differ with fuel viscosity.
Have the applicable emissions, storage and fire requirements checked with a suitable adviser or authority. South Africa's air-quality framework includes listed activities and municipal responsibilities; an attractive quote does not establish permission to use a particular fuel at your site.
For the trial, agree the quantity, cost, supervision, stop criteria and measurements in advance. Record current performance, then compare the new fuel at similar production conditions. Have the necessary burner and emissions checks done. Exhaust-gas measurements help assess combustion, but a combustion reading alone is not the same as measuring useful heat across your whole process.
You should be able to answer three questions before approving ongoing supply:
- Does the measured operating saving justify the changeover cost?
- Can the equipment maintain the required output and product quality?
- Are the supply arrangements and cash requirements workable for the business?
Download the one-page fuel-switch decision sheet to organise the numbers and open questions. For the broader equipment and buying checks, use Lumrgi's industrial burner fuel selection guide.
Put your current fuel bill to work
Lumrgi supplies the processed and inspected IGNIFLOW industrial burner fuel range. The team can discuss the options to assess for your equipment and the information needed to compare them with your current fuel.
Already have a burner? Ask whether IGNIFLOW Bespoke can be tailored to suit it at a much lower price than diesel, while meeting your viscosity and preheating requirements.
If you also need a burner, ask about Lumrgi's subsidised burner offer with a 12-month fuel supply contract.
Tell Lumrgi what you heat or dry, where you are, and roughly how much fuel you use each month. Include your current fuel and delivered price if available. That gives the team a useful starting point for discussing the cost comparison and what needs checking next.
