Insights 11 November 2026 Lumrgi Solutions
How to choose industrial burner fuel in South Africa
Buying burner fuel yourself? Learn what to check, what to ask the supplier and when to involve a technician. Includes a printable buyer's checklist.

Editorial illustration created for this guide; not a photograph of a Lumrgi site or a representation of specific fuel grades.
When you buy burner fuel, you need to know whether it will work in your equipment, what it will cost to do the job, and whether you can get it when you need it.
Choose industrial burner fuel by matching it to your burner, checking the fuel information and delivery terms, and comparing the cost of producing the heat you need. A lower price per litre is only part of the calculation.
If you order fuel for a boiler, dryer or kiln in South Africa, these five checks will help you compare offers and ask the right questions.
1. Will the fuel work in your burner?
Start with what you already know:
- What are you heating or drying?
- What fuel do you use now?
- What is the make and model of your burner?
A photo of the burner's identification plate can help if you cannot find the model number. If you have trouble with lighting, blocked filters or uneven heat, mention that too. Those problems need investigation; changing fuel may not solve them.
Ask your burner supplier or a qualified burner technician to confirm whether the proposed fuel suits the equipment. A burner designed for light oil cannot automatically use a heavier fuel. Some systems need extra heating or different equipment to handle it. Riello's burner documentation shows how these requirements vary with the fuel.
Also say whether the hot gases touch the material being dried. That affects the checks needed to protect product quality.
Unsure where to start? Tell Lumrgi what you heat and which fuel you use now. You can begin the conversation before you have every technical detail.
2. What does the fuel specification tell you?
Ask for the technical data sheet for the exact fuel on offer. This describes its properties. You do not need to interpret every figure yourself, but it helps to recognise the main terms.
| Term on the sheet | What it means for your decision |
|---|---|
| Viscosity | How easily the fuel flows. It affects pumping and how the burner sprays the fuel. Always check the temperature stated beside the figure. |
| Density | How much a litre weighs at the stated temperature. Together with energy content, it helps you compare the energy in each litre. |
| Calorific value | The fuel's energy content. Ask whether the figure is gross or net, and compare on the same basis. |
| Water and sediment | Water and solid material in the fuel. Ask what limits apply and how they are checked. |
| Sulphur and ash | Properties relevant to emissions and deposits. Ask whether the stated levels suit your equipment and site requirements. |
| Flash point | A property used to assess fire risks during handling. Ask for the test method and a laboratory-confirmed result. It does not tell you how easily your burner will light. |
Temperature matters. Fuel that flows well through a warm system may behave differently after standing overnight. Your technician should check whether the tank, pipes and burner need heating, including at start-up. Heavier oils may need heating for pumping and spraying into the flame.
Ask for the current safety data sheet too. It explains the hazards, safe handling and what to do in an emergency. A certificate of analysis, when available, shows the listed test results for a particular sample or batch.
One useful question is: “Are these typical figures, agreed supply limits, or results from the batch I will receive?” Then ask what happens if a delivery falls outside the agreed limits. Keep the answers with your quote. You can discuss fuel specifications with Lumrgi if you need help identifying the information to request.
3. Which fuel costs less to do the job?
Compare quotes with delivery included and VAT treated the same way. Then look at how much fuel you need to produce the same result.
Here is a made-up example. Both fuels are assumed to complete the same production run to the same standard under comparable conditions. These are not current prices or IGNIFLOW performance figures.
| Comparison | Fuel A | Fuel B |
|---|---|---|
| Delivered price, excluding VAT | R10.00 per litre | R11.00 per litre |
| Fuel used for the same production run | 1 000 litres | 850 litres |
| Fuel cost for that run | R10 000 | R9 350 |
Fuel B costs more per litre but costs R650 less for that run. The calculation is simply litres used × price per litre. Add any differences in heating electricity, servicing, handling and equipment changes before deciding which option costs less overall.
For your own comparison, use measured fuel consumption and production records. A boiler comparison needs the same steam output and comparable operating conditions. A dryer comparison needs similar starting moisture and the same finished dryness. The US Department of Energy's steam-cost guide explains why fuel price, equipment performance and operating conditions all matter.
4. Can the supplier meet your delivery needs?
Give suppliers your actual delivery address. Transport can change the price considerably between a Gauteng factory and a more distant site.
Ask these questions before you place an order:
- How much can you deliver at a time? Check that your tank can safely take the load, allowing for fuel already inside.
- How far ahead must I order? Agree when to reorder and what happens if a delivery is delayed.
- Can your tanker reach and unload at my site? Check access, delivery hours, connections and who provides the unloading equipment.
- What does the quote include? Confirm delivery, VAT, payment terms and any charges for smaller loads or waiting time.
If someone else receives the deliveries or maintains the tank, involve them before ordering. If you handle both, use these questions yourself.
5. What should you check before switching?
First, have your burner technician confirm that the fuel and any equipment changes are suitable. Ask how to change over safely, including what to do with fuel already in the tank.
Check the emissions, storage and fire requirements that apply at your site. If you do not have someone who handles these, ask a suitable adviser or the relevant local authority. South African requirements depend on the equipment and activity; smaller installations can have obligations too. See the municipal explanation of air-quality responsibilities and government guidance on small boilers. A fuel described as processed or recycled is not automatically approved for use at every site.
Once those checks are complete, discuss whether a trial makes sense. Agree its cost, quantity, who will oversee it and when it should be stopped if a problem occurs.
Record fuel use and output on your current fuel first. During the trial, check how the burner starts and runs, filter attention and the quality of what you produce. Have a qualified technician carry out the necessary combustion checks and arrange any required emissions testing. A flame that looks fine does not prove the burner is running efficiently; exhaust-gas measurements help establish that.
A short trial can show how the fuel runs now. Longer-term maintenance and delivery reliability still need watching.
Keep the questions handy
Download the one-page burner fuel buyer's checklist. It covers what you can gather yourself, what to ask the supplier and what to check with a technician. Leave anything you do not know blank and use it to start the discussion.
Find a fuel option that suits your business
Lumrgi's IGNIFLOW industrial burner fuel range includes Origin, Advance, Apex and Bespoke. The fuels are processed and inspected, and Lumrgi has its own bulk storage. The grade and delivery arrangement should fit your equipment, location and fuel use.
Tell Lumrgi what you heat or dry, where you are, and which fuel you use now. That gives the team a starting point for discussing suitable options and the checks needed before a change. Include your approximate monthly use or burner details if you have them.
